Isartherm-Flex KIN 6050/KIN

Isartherm-Flex KIN 6050/KIN

Isartherm-Flex KIN 6050/KIN

Features

Isartherm-Flex 6050 is a diagonally braided packing made from permanently elastic, expanded pure graphite foils. It is used, in particular, in high pressure and high temperature applications. It is a standard packing that can be used in almost all areas of industry. It is also ideal as a header ring to prevent gap extrusion. Reinforced with Inconel fibers, impregnated with corrosion inhibitor.

Advantages

  • Wear-resistant
  • Gentle on spindle surfaces
  • Treats shafts gently
  • Highly extrusion resistant

Operating range

Valves
Pressure: p = 500 bar
Sliding velocity: vg = 2 m/s
Fans
Pressure: p = 8 bar
Sliding velocity: vg = 2 m/s
Mixers, agitators, kneaders
Pressure: p = 50 bar
Sliding velocity: vg = 2 m/s

Temperature
  • Continuous operation:
    t = -200 °C … +500 °C
  • Steam: tmax = +550 °C

Chemical resistance:
pH = 0 ... 14
Resistant to water, waste water, sea water, hot water, boiler feed water, condensate, steam, neutral vapors, air, nitrogen, acidic gases, hydrogen, volatile hydrocarbons, oils, mineral oils, fats, heat transfer oils and volatile solvents. Not suitable for use in highly oxidizing, sticky or abrasive media.

Standards and approvals

  • Yarmouth Research API 589 – Fire-safe

Variants

6050

Forms of supply

  • Sold by length, blank cuts, precompressed rings with straight or slanted cut
  • Box contents
    up to 6,35 mm: 1 kg
    7 - 10 mm: 2 kg
    11 - 13 mm: 3 kg
    14 - 24 mm: 5 kg
    from 25 mm: 10 kg

Similar products

BuraTAL-Flex 6070

BuraTAL-Flex 6070 is a graphite-based, multi-layered high performance packing It is manufactured from high-purity expanded graphite yarn (>99 %) combined with a newly-developed high temperature impregnation. For long-term stable use in the high temperature range, the packing is additionally finished with a corrosion inhibitor. The multi-layer structure combines the benefits of maximum possible gap bridging due to the inner Inconel wire reinforcement with protection of the high-quality spindle surfaces in the valves. The packing can be installed without special end rings.

BuraTAL-Flex 6224

BuraTAL-flex 6224 is a diagonal braided packing made from a combination of Aramid and PTFE yarns with special impregnation. 6224 is the preferred choice for valves, especially low emission applications.

BuraTAL-Flex 6250

BuraTAL-Flex 6250 is a concentrically braided packing with a dense PTFE yarn sleeve and a carbon yarn core. In addition it contains a special impregnation. 6250 is the preferred choice for fugitive emission, applications and for on/off and control valves.
Contact

Inquire about individual solutions

We develop and produce customer-specific special and individual solutions for every application.

Inquire now Discover reference projects
Back to the overview

Technical Datasheet KIN Isartherm Flex TDB 6050